Putting in a brand new stereo in a Toyota Camry provides you improved sound and permits adding up to date features like navigation and subwoofers. Older fashions of the Toyota Camry possible have stopped working or the sound has severely deteriorated. Swapping out the stereo for a new unit takes just a few primary tools and fewer than an hour. This guide covers models from 1987 by means of 2000.
Toyota Camry Car Stereo Installation Instructions
1. Open the hood and locate the battery. Disconnect the negative battery cable and guarantee it doesn’t touch any metal parts.
2. Pry the trim ring from around the stereo with your fingers, some early models have two screws on the top of the trim that have to be removed. Pull the trim to the side and let it grasp from the cigarette lighter wire.
3. Remove the four screws that secure the radio in the sprint, two on every side. Pull the stereo out of the dash and disconnect the wires behind the head unit. Search for an amplifier behind the stereo and take away the wires if found.
4. Connect the wiring harness adaptor to the original harness, use the wire from the amplifier if there’s one. Slide the brand new stereo into the Toyota radio adaptor and secure it per the producer’s instructions. Connect the wiring harness adaptor and antenna wire to the again of the new stereo and slide your entire meeting into the dash.
5. Reconnect the destructive battery cable and switch the radio on. Confirm the speakers and controls are all working properly. Safe the stereo into the dash with the unique four screws and exchange the trim.
